weTORQ™ - Learn More
weVERIFY™ - Learn More
weBUCK™ - Learn More
weHOLD™ - Learn More
About we - Learn More


Extremely mobile with an extended battery life, weCATT™ can easily be transferred between rigs and plugs into WINCATT® or other systems with no external attachments or encoders required. It rapidly records torques, turns and hook loads, and transmits data to other monitors by wireless, EX receiver or mA output. The results are more accurate, and with fewer components, the system is more reliable. Worldwide certification: ATEX-CE, UL, CSA, IECEx.

Product Specs:  
Torque Capacity: -50,000 to 50,000 ft. lbs. (based on thread type)
Tension Capacity: 200,000 lbs. compression to 1,000,000 lbs. tension with 2.25 safety factor (based on thread type)
Sampling Rate: Dynamic, up to 480 samples/second
Torque/Hook-Load Accuracy: 1% of full scale
Turns Resolution: 0.001 turns
Temperature Range: -40°C to 70°C (158°F)
Battery Life: 30 days of continuous use
Transmission: 2.4 GHz approved US, Canada and Europe
Transmission Type: line of sight
Enclosure Rating: Type 4X and IP 66
Hazardous Area Classification: Class 1, Division 1, Zone 1, Group IIB, T4
  Protection Type: EX Flameproof Enclosure (d)
  Certification: CSA/UL/ATEX/IECEx
Torque Sub: Designed to API 8C specifications
Threads: Manufactured to API 7 specifications
Weight: Approximately 350 lb.
Length: Standard shoulder to shoulder 21.62” (18.63” is the minimum shoulder to shoulder length if there is zero recut allowance)

Technical Manual


  1. weCATT™ comes with WINCATT® Software & External Hardware for power tong applications: (CRT and Power Tongs)
  2. weCATT™ comes with WINCATT® Software only (standard or Class 1 & Division 2 laptop) (CRT Only)
  3. weCATT™: RS232 Data Stream: Torque, Tension, Turns, Battery Condition and Temperature
  4. weCATT™ comes with 4-20 mA analog outputs for torque and hook load
     © Copyright 2014 McCoy Global Inc. All Rights Reserved.